Close end caps are used to connect the open end of wires installed inside the junction box. It prevents the potential danger which may arise because of open end wires. It is an important protection element of the wire circuits.
You can choose the correct size from the table below:
This cable tie is for outdoor applications where UV light is effecting the environent.
Pure Nylon 6.6 (PA66)UL94 - V2 flame retardantWorking temperature -400C - 850C Only black color is avaliable
Material: Polyamide 6.6
Material Brand: Dupont, Ascend®
Flammability of Raw Material : UL 94 - V2
Humidity Absorption: 2,7%-2,8% (23°C -50% R.H.)
Installation Temperature: -10°C ~+85°C.
Working Temperature:-40°C ~+85°C.
Max sustaiaable tempeature for short time:+110°C.n
Good resistance to bases, oils, greases, oil derivates, chloride solvents. Limited...
The fiberglass tube features with good flexibility, insulation and chemical resistance, self-extinguishing.Widely applied to mechanisation, radio, office equipment and motor wireless device and other wiring insulation and mechanical protection.
Material : Pvc Coated Fibreglass SleevingWorking Temperature : 1050COperating Voltage : 2500 V
2/1 shrink ratio.Halogen-free.Electrical and heat insulation.By clicking you may reach product diameter and quantity information .
Material : PolyolefinShrink ratio: 2/1Halogen free, Self extinguishingWorking temperatureı: -550C ile 1250C Black color
Self locking head provides easy installation.You may lock the tie at any point on the cable tie surface.Suitable for both Interior and exterior applications. 304 high quality stainless steel.
Working Temperature -800C - 5000CSmooth surface and rounded edges protect the cable and the laborer.Water absorbtion %0 UL94V-2 Flame retardant,Ultraviolet and...
With its expandable charactes, it protects all desktop cables and items installed inside the electrical cabinets.
PET(Polietilen tereftalat)Working Temperature: -500C - 1500CUL94V-2 Flame retardantIt prevents damaging of hoses and cables working in hazardous conditionsIt resists gasoline, fuel and cleaning detergents.Provides economic and easy...
Heat treated fibreglass sleeving. Can service up to 450 degree celcious temperature. Used in heaters, heating elements and places which are required to be protected from heat.
Material: Heat treated glass fiberHalojen-freeWorking temperature: -400C - 4500COperating voltage: 800 VColor: White
Dielectric strength: 2.5 kVNo TackinessSmooth and Shiny SurfaceOperating Temp -40°C / 250°CUniform DiameterGood Varnish StabilityHigh StretchabilityContinous Length results in Minimal WastageCompatible with Insulating Varnish and Insulation System
Yellow/Green color Tube2/1 shrink ratio.Halogen-free.Electrical and heat insulation.By clicking you may reach product diameter and quantity information .
Material : PolyolefinShrink ratio: 2/1Halogen free, Self extinguishingWorking temperatureı: -550°C ile 1250°C
Yellow/Green color (used for earthing applications)
3: 1 Shrink ratio
Low longitudinal shrinkage
Flame retardant (out jacket only)
Super sealing against water, moisture or other contaminates
Continuous operating temperature : -45OC-125OC
Shrink Teperature: 125OC